SHIFT LEVER OVERRIDE
•
If a malfunction occurs and the shift lever cannot be moved out of the PARK position,
you can use the following procedure to temporarily move the shift lever:
•
Turn the ignition switch to the OFF position
.
•
Firmly set the parking brake
.
•
Remove the rubber storage tray liner from the center console, then lift up the front
of the shift lever bezel, carefully disengage the bezel from the shift lever housing, and
slide it up to the top of the shift lever
.
•
Push and maintain firm pressure on the brake pedal
.
•
Insert a small screwdriver or similar tool down into the access slot at the right rear
corner of the shift lever assembly, and push and hold the white override release lever
down
.
•
Move the shift lever into the NEUTRAL position
.
•
The vehicle may then be started in NEUTRAL
.
•
Reinstall the shift lever bezel (use care to avoid pinching the wiring), and the rubber
storage tray liner
.
TOWING A DISABLED VEHICLE
NOTE:
This section describes procedures for towing a disabled vehicle using a commercial towing
service
.
Towing
Condition
Wheels OFF
The Ground
MANUAL
TRANSMISSION
EURO TWIN
CLUTCH
TRANSMISSION
AUTOMATIC
(AISIN HD)
TRANSMISSION
Flat Tow
NONE
Trans in
NEUTRAL
Trans in
NEUTRAL
NOT ALLOWED
Dolly Tow
Rear
NOT ALLOWED NOT ALLOWED
NOT ALLOWED
Front
OK
OK
OK
Flatbed
ALL
BEST METHOD
BEST METHOD
BEST METHOD
WHAT TO DO IN EMERGENCIES
114
Содержание 500L 2015
Страница 123: ...5 Battery 6 Front Distribution Unit 7 Washer Fluid Reservoir 8 Engine Coolant Reservoir MAINTAINING YOUR VEHICLE 121...
Страница 145: ...NOTES 143...
Страница 146: ...NOTES 144...