The following factors determine how long a battery recharge will take:
•
The battery’s current state of charge (percent depleted)
•
What level EVSE is being used (Level 1 or Level 2)
•
Ambient temperatures
•
Whether the vehicle is on during charging
NOTE:
•
Charging times are estimates based on a completely discharged high voltage battery
.
•
Charging times will vary based on the age, condition state of charge, and temperature
of the high voltage battery
.
•
Charging times may be longer if a thermal self-protection reduces the charging current
from the EVSE
.
EVSE Operation And Status Information
Indicator
Description
1 — AC Indicator LED
Green indicates READY
RED Indicates a fault
2 — Fault Indicator LED
Green indicates READY
RED indicates a fault
3 — Charge Level Indica-
tor LED's
All ON indicates system ready and not charging
LED's turning on and off in sequence indicates vehicle
charging
When the EVSE is first plugged in it will go through an initialization and self test
.
For the
first three seconds after plugging in your EVSE, all the LED's will remain off
.
After ap-
proximately three seconds, the EVSE performs an internal self test and Ground Continu-
ity Test
.
This process takes approximately six seconds
.
During the internal self test the unit
turns on one Charge Level Indicator LED every 1
.
5 seconds until all the Charge Level
Indicator LED's are illuminated
.
AC LED
Fault Indicator
LED
Charge Level Indicator LED's
Time
•
•
•
o
o
o
1
.
5 sec
•
•
•
•
o
o
3
.
0 sec
•
•
•
•
•
o
4
.
5 sec
•
•
•
•
•
•
6
.
0 sec
GETTING STARTED
14
Содержание 500e 2017
Страница 162: ...NOTES 160...
