Fiap profifeed SolarFeeder, Руководство по эксплуатации

Страница: 12 / 126

12
FEEDING GB
profi
feed SolarFeeder
SET UP AND COMMISSIONING
In order to achieve the optimum feeding result, it is necessary to prepare a feeding plan
in advance. For this purpose, consider when you want to feed how much feed. This means
on which days of the week, which amount of feed is to be introduced over which number
of feedings (max. 6 feedings per day possible). The ejection quantity depends on vari-
ous factors, including the pellet size used, the type of feed used, the ejection speed set,
and the feeding duration. To determine a practicable value, load your automatic feeder
with the desired type of feed and determine the amount of feed that is ejected over 10
seconds at the correspondingly set ejection speed (inverting a bucket and then weighing
the feed). For example, if you get 100g of feed at 10 seconds, you can expect 250g per
feeding at 25 seconds.
Assembly
According to exploded view including
profi
feed SolarFeeder modules (see page 2).
For assembly and maintenance please watch
the corresponding product videos in our
Youtube channel:
https://www.youtube.com/user/FIAPGmbH
Connecting the profi control UNIVERSAL control to accumulator 6 V - bat-
tery
Connect the battery cables included in the delivery as follows:
Red cable to + and white cable to -.
In the following, program the profi control UNIVERSAL control (individually accor-
ding to your wishes) before mounting it on the intended holder.
Programming the control
Connect the control to a 6 V or 12 V battery and the feeder, the control automatical-
ly recognizes the connected voltage source. The display will show the current state of
charge of the battery. The display is now set to Monday, 12:00 noon (PM).
If the display does not show anything, press the „PROG“ key once to activate
the control and go to the previously mentioned point.
Setting the system time
Press „PROG“ key again. One of the symbols in the top line (display of the day of the week)
will now start flashing. Set the current day of the week by briefly pressing the „-“ key
until the desired day flashes.