Display
F1X5_RS
Data: 13/01/16
file: F1X5_RS_ing.doc
Pag 12/12
REGISTER TABLE
Register
Address Hex N° of byte register
Threshold for relay 1, HIGH (#) (not used w/o relay)
0x00
2 byte (HIGH byte don’t care)
Threshold for relay 1 LOW (#) (not used w/o relay
0x01
2 byte
Threshold for relay 2 HIGH (#) (not used w/o relay
0x02
2 byte (HIGH byte don’t care)
Threshold for relay 2 LOW (#) (not used w/o relay
0x03
2 byte
Visual HIGH
0x04
2 byte (HIGH byte don’t care)
Visual LOW
0x05
2 byte
Impuls HIGH
0x06
2 byte (HIGH byte don’t care)
Impuls LOW
0x07
2 byte
Decimal N°
0x08
2 byte (HIGH byte don’t care)
Preset HIGH
0x09
2 byte (HIGH byte don’t care)
Preset LOW
0x0a
2 byte
Zero setting
0x0b
2 byte (HIGH byte don’t care)
Input selection
0x0c
2 byte (HIGH byte don’t care)
Filter debounce input
0x0d
2 byte (HIGH byte don’t care)
Relays mode (not used)
0x0e
2 byte (HIGH byte don’t care)
Time activation relays (not used)
0x0f
2 byte (HIGH byte don’t care)
Thresholds relays under password (not used w/o relay)
0x10
2 byte (HIGH byte don’t care)
Absolute counting value HIGH (#)
0x11
2
Absolute counting value LOW (#)
0x12
2
Relative counting value HIGH (#)
0x13
2
Relative counting value LOW (#)
0x14
2
Operation Register (*)
0x15
2 byte (HIGH byte don’t care)
(#) this parameter is expressed in encoder count number, then is not multiplied by
VISUAL
/
IMPULS
correction
factor. The value read from serial port is equal to the display value only if
VISUAL
/
IMPULS
=4.
Technical Features
Power supply
115Vac, 230Vac, 24Vac, 15÷30Vdc
±
10%
Line frequency
50/60 Hz
Power absorbtion
3 VA
Display
–99999; 999999
Inputs type
Optoisolated
Encoder power supply
12Vdc (max 60mA)
Count input
Open collector NPN/PNP
Push-pull
Differential Line driver
Mechanical contact
Input maximum frequency
10 KHz
Count possibility
Bi-directional
Monodirectional (counting up)
Monodirectional (counting down)
Serial port connection
RS232 or RS485 MODBUS RTU protocol
Working temperature
0-50°C
Relative humidity
10-90%
Size (with terminal box)
48x96x100 mm
Drilling template
45x92 mm
Front case protection
IP54
Electromagnetic compatibility
2014/30/EU
Low voltage
2014/35/EU
RoHS
2011/65/EU
Manufacturer
All communications to the manufacturer should be addressed to:
FIAMA s.r.l., Via G. Di Vittorio, 5/A - 43016 San Pancrazio (Parma) - Italy
Tel. (+39) 0521.672.341 - Fax. (+39) 0521.672.537 – e-mail: [email protected] - www.fiama.
it
FIAMA srl is not responsible for any damage to persons or things caused by tamperings and wrong use
and in any case that are not consistent with the features of the instrument.
