manualshive.com logo in svg

FIAL 2314, Руководство пользователя

Поделиться
Скачать
FIAL 2314 Скачать руководство пользователя страница 24

Model 2314/2316 SNMP Alarm Encoder 

 

18 2314/2316-042315 

 

Fial Incorporated

 

The state of the Controls is changed by clicking the On or Off link in the Desired State column.  If the 

control state information on your browser screen is old, you may get the message: “Your control could 
not be done.  The state of the Controls has changed.”  This means that someone else has already 

changed that control point to the state you requested, via an SNMP set command, or via a Web browser 
action, but your web page view has not yet been updated to reflect that change.  Refresh your page view to 

fetch and display the current point states.   
 

Use the dialog table at the bottom of the screen to provision the 4 control points.  This dialog will not appear 
unless you are logged in as administrator.  To provision a Control, edit the following fields: 

Edit Control Point: Use this drop-down box to select the Control point you wish to edit.  
 

Name: Enter a name for the selected Control.  Any characters are allowed in this field.  Control 

names can be the same as other Controls; however, this is not recommended for obvious 

reasons.   

 

Momentary: Select Yes for Momentary operation of the selected Control point.  Select No for 

standard ON/OFF operation of the selected Control point.  If a Control point is set to 

Momentary, an ON operation will cause the relay to close for a minimum of 200 milliseconds 
after which the relay automatically opens again.

   

 

After all changes have been made, press the Submit button.  The Submit button must be pressed to 

register any changes made on this screen.  You can submit changes from many screens before doing a 
final Save & Reboot.  To actually install the changes, click the Save & Reboot link on the left side and enter 

the administrator login name and password.  

Содержание 2314

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды