manualshive.com logo in svg

FIAL 2314, Руководство пользователя

Поделиться
Скачать
FIAL 2314 Скачать руководство пользователя страница 11

Model 2314/2316 SNMP Alarm Encoder 

Fial Incorporated  

2314/2316-042315    

5 

 

 

 

Figure 4.  Battery Polarity Selection For Optoisolators 

 

AC POWER RECOMMENDATION (AC power supply not included) 
For the wide range 18 to 72 VDC supply voltage 2314/2316 RTUs, if DC Station Battery is 

unavailable and an AC power supply is required, the use of a 24V, 1.5 to 2.0 amp wall-mount or 
desktop style switching power supply is recommended.  These power supplies may be purchased 

from many different sources and generally cost around $20 to $30.  The power supply DC 
connector (typically a barrel style plug) will need to be removed and the power supply lead wires 

connected to the appropriate 2314/2316 DC power input connector terminals (provided with the 
unit).  Connect the power supply 

Positive

 lead to the 

Positive input

 connector terminal and the 

power supply Negative lead to the Negative input connector terminal.  The 2314/2316 DC power 

input connector 

Sta. Gnd

 terminal needs to be connected (jumper wire) to the proper power supply 

input terminal, which will depend on the ground reference used for the equipment connecting to the 

2314/2316 Alarm Inputs.  Make sure to follow the previous instructions regarding Station Ground 
requirements on page 4.   

 
 

LAN CONNECTION: The SNMP Alarm Encoder is connected to the IP network using an Ethernet 
RJ45 jack and standard 10BaseT or 100BaseT wiring

. 

 The LAN port will automatically switch to 

10BaseT or 100BaseT, depending on the connection type at the other end of the cable.   
 

EXTERNAL I/O CONNECTOR 
A 50-pin Champ (AMP) connector is used for alarm input, analog inputs and relay outputs. 

It is best to order a pre-assembled cable assembly from a company such as Grayhill.  One easy 
option is to use a cable with a 50-pin AMP connectors at each end and a 66M block (punch-down 

block)  pre-wired to a 50-pin AMP connector.  The cable end that connects to the 2314/2316 
should be a male, connector.  The other end should mate with the 66M block.  66M blocks can be 

ordered with male or female connectors.  The punch down block can be mounted on the wall, and 
all the station connections brought to that block.  Follow the pin assignments for the connector 

detailed at the end of this document (Table 8-1).   

Содержание 2314

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды