Fhiaba 599 Series, Руководство по установке

Страница: 14 / 80

E W
E W
12
Series: All
www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
The appliances are delivered from the factory for operation at either
230V AC - 50Hz (Europe, UK and other countries) or 115V AC - 60Hz
(US and Canada).
They are provided with a suitable supply cable and plug to be con-
nected to an appropriate 16A socket (Europe, UK and other coun-
tries) or 15A socket (US and Canada) provided with an ef À cient
grounding.
A circuit breaker should also be installed and should be easily ac-
cessible so that it can be easily switched off before performing any
installation or maintenance.
To connect to the water supply system (for appliances equipped with
ice makers) a tap with a male 3/4” connection should be provided,
which must also be easily accessible once the appliance is installed.
The appliance is provided with a water supply hose and seal kit which
is suitable for high water pressure and complies the Food Regula-
tions.
The water À lter cartridge, which is provided with the appliance,
should be installed according to the accompanying instructions.
Use only the new hose and the new gaskets which are supplied with
the appliance. Discard any hose and gasket which may have al-
ready been installed.
The appliance should be connected only to
a drinkable water supply system.
The Built-in Fhiaba À lter cannot make it safe
to drink any water which is not suitable for
human consumption.
Electrical and Water connection
Do not use extension cords or adapters.
Once the appliance has been connected to
the water system, turn the Ice Maker off (touch
the button
on control panel to switch it off)
before the main water is shut off.
Energy: Alternatives and Home Automation
If energy is supplied through an alternative energy power source
(solar, geothermal, etc..) or if home automation systems are installed,
it is necessary to install the Alternative Energy Kit to integrate the unit
into the power grid.