FHF InduTel IP, Руководство по эксплуатации

Страница: 9 / 48

9
Default Settings of the Telephone 2.1.2
DHCP mode
client
IP address (fall back)
Mask (fall back)
192.168.0.77
255.255.255.0
Announcement of the current dial *558800
Master Reset to Factory dial **314159265359
Username admin
Password fhf
Number redial memory empty
Speed dial memory empty
Relay function switched off
Tone call melody 2
Tone call volume 3
Handset volume 5
Microphone sensitivity 6
Table 1: Default Settings of the Telephone
2.2 Assembly and Installation
Since all telephones have the same preset IP address, the network settings should be
configured with the web server of the telephone before the telephone is assembled.
The username and password at the time of delivery should be changed for security
reasons.
The assembly of the telephone should only be carried out by qualified specialist per-
sonnel.
Wall Assembly 2.2.1
Assembly is carried out on a firm and even surface.
Fasten the telephone to the wall with four screws (of a size of up to Ø 8 mm).
Lead the LAN cable trough the cable screws and fasten the delivered device connect-
or plug in to the LAN cable and plug the connector into the RJ45 plug-in. Then fasten
the cable screw.