PowerWizard 1.0 & 2.0 Control Systems User Manual
4.1.2 PowerWizard 2.0 Menu Tree
PowerWizard 2.0 Generating Set Control Menu Structure
Figure 6: PowerWizard 2.0 Menu Tree
MAIN MENU
EVENT LOG
ENGINE OVERVIEW
AC OVERVIEW
CONFIGURE
I/O STATUS
CONTROL
PREFERENCES
ACTIVE EVENTS
1
GENSET CONTROL
1
ENGINE CONTROL
0
ENG SPEED SENSOR
ERRATIC/LOST
3/17
ACTIVE
OCC 1
GEN OVER CURRENT
WARNING
1/3
INACTIVE
OCC 1
0kPa
23 C 24.8V
0 rpm
2.1Hrs
STOPPED
AVG: 481 V
L-L
324V
60.2Hz 0.82
LAGGING
TOTAL kW
216
48%
CONFIGURE
SECURITY
SETPOINTS
TIME DATE
ENG OPERATE HRS
CONTROL
AUTOMATIC START/STOP
AVR DESIRED VOLTAGE
GOV DESIRED ENG SPD
ENG MONITOR/PROTECT
BATTERY VOLT MON
CRACK/START CTRS
ENG COOL TEMP MON
ENG OIL PRES MON
ENG SPEED MON
SERVICE MAINT INTERVAL
EVENTS
EVENT I/P FUNCTIONS
EVENT O/P FUNCTIONS
EVENT RESPONSE CFG
EVENT SYSTEM
EVENT O/P FUNCTIONS
EVENT INPUT #1
EVENT INPUT #2
EVENT INPUT #3
EVENT INPUT #4
EVENT INPUT #5
EVENT INPUT #6
DIGITAL INPUTS
INPUT #1
INPUT #2
INPUT #3
INPUT #4
INPUT #5
INPUT #6
INPUT #7
INPUT #8
RELAY OUTPUTS
OUTPUT #1
OUTPUT #2
OUTPUT #3
OUTPUT #4
OUTPUT #5
OUTPUT #6
OUTPUT #7
OUTPUT #8
DIGITAL SELECTORS
DIGITAL SELECTOR #1
DIGITAL SELECTOR #2
DIGITAL SELECTOR #3
DIGITAL SELECTOR #4
DIGITAL SELECTOR #5
DIGITAL SELECTOR #6
DIGITAL SELECTOR #7
EVENTS O/P FUNCTION
EVENT OUTPUT #1
EVENTS RESPONSE CFG
DIAGNOSTIC CONFIG
ENG PROTECT CONFIG
GEN PROTECT CONFIG
OTHER SYSTEM CONFIG
DIAGNOSTIC CONFIG
PRESSURES
TEMPERATURES
LEVELS
OTHERS
ENG PROTECT CONFIG
PRESSURES
TEMPERATURES
LEVELS
OTHERS
WARNING AUTO RESET
ENABLED STATUS
ENABLED
GEN MON/PROTECT
GEN AC MONITOR
GEN AC PWR MONITOR
GEN OVER CURRENT
GEN OVER/UNDER FREQ
GEN OVER/UNDER VOLT
I/O
DIGITAL INPUTS
DIGITAL OUTPUTS
RELAY OUTPUTS
SPARE ANNALOG INPUT
NETWORK
DATALINK - SCADA
DIGITAL OUTPUTS
OUTPUT #1
PROG TRIP POINTS
PROG TRIP FUNC #1
OTHER
DIGITAL SELECTORS
REDUCED PWR MODE
PROG TRIP POINTS
CURRENT LEVEL = 2
DROP TO MIN LEVEL
ENTER LEVEL 1 OR 2
ENTER LEVEL 3
CHANGE LEVEL 1 PWD
CHANGE LEVEL 2 PWD
CHANGE SCADA PWA
SETPOINTS
CONTROL
ENGINE MON/PROTECT
EVENTS
GEN MON/PROTECT
I/O
NETWORK
OTHER
PREFERENCES
CONTRAST
PRESSURE
TEMPERATURE
LANGUAGE
CONTROL
SPEED ADJUST
PROG CYCLE TIMER
ADJUST SPEED
0.0 Hz
1234567
OUTPUT1
01-0---
OUTPUT1
101----
*1
*1
DIGITAL I/P
-2-4-----8
RELAY O/P
1---567-
DIGITAL O/P
1
*2 OR *3
*2
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
USE
*1. To adjust settings use: 1.
UP
and
DOWN
Keys to select the submenu.
2. Use
ENTER
Key and
UP
,
DOWN
,
LEFT
,
RIGHT
Keys and then
ENTER
for the new settings to take effect.
*2. Scroll down to see all events. Events are listed in the following order, Present,
Active, Inactive. Only
SHUTDOWN
events can be reset; some events can be set
as a
SHUTDOWN
. To reset an event, the control must be in
STOP
. All other
events will become
INACTIVE
once the condition goes away.
*3. To
RESET
: press
ENTER
to get to the details of the event and then
ENTER
again.
*4. To get back to the
MAIN MENU
at any time, press or and
When unsure about your location on the screen, use
ESCAPE
Key and then refer to
this chart.
ESCAPE
KEY
ENTER
KEY
OR
OR
12
