www.ffv.com
V 1.0 July 2015 MP
Preliminary Version subject to change without prior notice
29
SPECIFICATIONS
DIGITAL VIDEO INPUT/OUTPUT:
SD/HD-SDI Standards
:
SMPTE 274M (1080i), SMPTE 296M (720p),
SMPTE 347M (NTSC & PAL)
Ancillary Data Support:
Rec/Playback & Pause 4 lines of ancillary
data including Closed Caption CEA-608 &
CEA-708. Ancillary TC SMPTE 12M-2-2008
Supports lines 8, 9, 10 & 11 interlaced or
progressive
Supported Resolutions:
1080i/60/59.94/50/24
(1920 x 1080/60/59.94/50/2:1 Interlace)
720p/60/59.94/50
(1280 x 720/60/59.94/50/ 720p/23.98/24.00
Progressive)
NTSC (720 x 486/59.94/2:1 Interlace)
Supports 4:3 or 16:9 aspect ratio
PAL (720 x 576/50/2:1 Interlace)
Genlock Input:
59.94 Hz: Black burst SMPTE
170 M, 50 Hz: ITU-R BT.470 at 75 ohms
Connections
: BNC 75 ohms
DIGITAL AUDIO INPUT/OUTPUT:
HD-SDI digital audio specs.
8 Channels embedded
Audio Channels:
HD embedded 8 in/8 out
SD embedded 4 in/4 out
Resolution: 24 bits
Sampling Rate: 48 KHz
Analog audio input/output
Analog I/O: Stereo Balanced
Connections: XLR3 Connectors
Analog audio specifications
Resolution: 16 bits
Audio Channels: 2 in 2 out
(Per video channel)
Dynamic Range: 80 dB
Harmonic Distortion: 022%, -73dB
Output Impedance: 600 ohms
Sampling Rate: 48 KHz
Passband: 0.045 FS &
Passband Ripple: +/- 0.1 dB
COMMUNICATION INTERFACE:
RS-422 Interface: 38400 baud
Protocols: Sony 9 Pin & Odetics
REMOVABLE STORAGE:
Supported Solid State Drives:
SATA II, 3 Gb/s Interface 2.5” SATA 9.5 mm
TIME CODE:
SMPTE/EBU: Longitudinal (LTC)
Ancillary (ATC) SMPTE 12M-2- 2008
CODEC:
Method: Motion JPEG2000 (J2K)
File Format: QuickTime or Native
Bit Rates: HD: 100Mb/s SD: 50Mb/s
GENERAL
Physical Dimensions
:
Half Rack 2RU: 3.5”H x 8.5” W x 15” D
Power:
100-240VAC 50/60Hz
Operating Temperature:
0 °C to 50 °C
Humidity
: 90% relative humidity with no
visible condensation
