EN
12
12
ASSEMBLING THE FEET:
1. Put the feet into the intended opening at the bottom side of the ladders. Center the holes for the
screws of ladder and foot.
2. Tighten the lock nut. Take care the lock nut is properly tightened. The nuts should face outwards
when the scaffold is completely folded.
3. Repeat this process with each hole.
ASSEMBLING AS SCAFFOLD:
1. Hang platform onto the rungs of the two ladders.
2. Put the support bars into the indicated holes on each side of the platform. Put the thick side of the
support bar into a suiting hole at the side of the ladders. Secure it with the safety catch.
3. Fix the railing with the remaining screws and nuts on the left and the right upper side of each
ladder.
4. To move the scaffold tip it over to the side with the rollers at one side of the ladders.
CAUTION: Take care no person or equipment is on the scaffold when moving it! If possible get the
help of another person to avoid injury and damage to the product.
ASSEMBLING AS STEPLADDER:
1. Connect both ladders by hanging the upper rung of
one ladder into the suspension on the other.
2. Put the supporting bars into the small holes at the
side of the ladder. Put the thick side of the support
bar into a fitting hole on the other ladder, secure
with a safety catch.
