Onewire ESC Connection
On KISS FC v2 hardware and a firmware of at least 1.3RC38a the ESC can also be connected
Betaflight
Connection
Signal 1 – 4 have to be connected to the corresponding FC Motor outputs. The TLM wire has to
be connected to an available serial TX pin. (Please see below example based on Omnibus FC)
Configuration
In order to utilize ESC provided current and voltage sensor the following settings need to be
applied in Betaflight. (Feature, motor protocol and meter can be configured through the GUI
itself). In addition the correct serial port need to be selected and assigned to ESC sensor.
Page 6
