Basic Setup
4S
For 4S usage please note that on 5” and higher builds the use of the supplied capacitor is
advised. On 3” to 4” builds the capacitor is not required.
6S
For 6S usage an additional capacitor with the following specification is mandatory. You can use
either a single capacitor or use multiple ones which can be connected on each corner of the
ESC.
Minimum 330uF
50v
ESR < 1ohm
We recommend to use the provided 337CKE050M capacitor.
KISS-FC
Traditional ESC Connection
On KISS FC hardware motor signals are connected to the corresponding motor output and TLM
is connected to one of the TLM pads. GND you can choose the solid or dotted line.
Page 5
