Fetco PEL0101, Руководство пользователя

Страница: 11 / 26

EN
GL
ISH
pressing the increase key or the decrease key. If you add some product (liquid that touches
the level probe), the function will be deactivated and the slush
preparation will reach the density value that was previously set on the
electronic board. When this function is active, you will see the following
As for the selection menu, the next screen is like the one below:
This screen allows you to activate (LOCK) or deactivate (UNLOCK) the
“keyboard lock” function by pressing the
or buttons. This function
is suitable in self-service places, in order to avoid people from changing
the values set. When the keyboard is locked, the electronic board will
show a “dot” on the display as shown on the screen below:
If the machine is turned OFF and ON, the electronic board will be in
LOCK position again.
Warning! The keyboard lock can be activated if the electronic
board is in “Standby" or “MotorOn” mode.
Turning OFF and ON of the washing function. If the function is active,
the electronic board will show the screen below:
In this condition all buttons and the cooling functions are NOT active,
apat from the MENU button.
This screen shows the time set on the machine. If it is different from the
place where the machine is installed, you can change it by following the
steps below:
1) press the button;
2) the first value will start to blink. If you want to change the value, you need to press the button;
3) if you press the button;
4) the second value will start to blink. If you want to change the value, you need to press the
button;
5) if you press the button;
6) the third value will start to blink. If you want to change the value, you need to press the
button;
7) press the button;
8) the fourth value will start to blink. If you want to change the value, you need to press the
button;
9) press the button to exit this function. The time will be saved.
Warning! During the time adjustment, the date (MM/DD/YY) will appear on the upper line. It
can be different from the date of the place where the machine is installed, but the machine
will work without any problem.
NOTE: First Class Millennium BASIC does not display this screen and all other screens here
reported in the dotted square. These will only be active in the ADVANCED version.
Defrost function : On the screen you can see the defrost ON and OFF
time. If the two values are the same, the function is deactivated. In
order to change the ON and OFF time, follow the steps below:
Please / refill / LOWLEVEL
*
1L
SLUSH
*
X
■
KeyBoard
UNLOCK / LOCK
Washing
OFF / ON
Washing
■
T I M E
hh.mm
DEFROST
OFF 00:00
DEFROST
ON 00:00