2
G
W
G
W
NEMA PLUG CONFIGURATION
NEMA 5-15P NEMA 5-20P NEMA 6-15P
FETCO
®
HWD-2105 Hot Water Dispenser
Contact Information
FETCO
®
Food Equipment Technologies Company
600 Rose Road
Lake Zurich
•
IL
•
60047-0429
•
USA
Internet:
www.fetco.com
Phone:
(800) 338-2699 (US & Canada)
(847) 719-3000
Fax:
(847) 719-3001
Email:
Description & Features
Water temperature selectable to 158°-207°F/70-97°C English and Metric temperature ranges selectable
Maximum single dispense is 24ounces/700cc in 15 seconds maximum dispense time
Non-Temperature on Demand and Temperature on Demand (TOD) configurations is available as separate equipment.
Specifications
Standard Electrical Configurations-DOMESTIC & CANADA
Configuration
Code
Heater
Configuration
Voltage Phase
Wires
NEMA
Plug
KW
Maximum
Amp Draw
Gallons/Hour
H210511
1 X 1.44 kW
120
1
2+G
NEMA 5-15P
1.5
12.0
4.0 gallon*/15 liter
H210521
1 X 2.1 kW
120
1
2+G
NEMA 5-20P
2.2
17.5
5.7 gallon*/22 liter
Standard Electrical Configurations-DOMESTIC & SPECIALTY
H210531
1 X 3.2 kW
200-240
1
2+G
NEMA 6-15P
2.3-3.3
11.2-13.4 6-8.7gallon*/22.7-33 liter
Electrical Configurations- EXPORT & CANADA
H210541
1 X 3.2 kW
230
1
2+G
Cord Only
†
2.9 12.8
7.8
gallon*/29.5 liter
Temperature range is selectable from 158°-207°F/70-97°C based on 207°F/97°C hot water tank temperature.
*Flow rate based on 65-70°F 18-21°C water mains supply temperature at lowest possible power supply current.
Selectable English and Metric temperature units.
† For EXPORT, Cord without plug will be attached
Single touch pad selectable hot water dispense temperature.
Power Plug Configurations
Pressure: 40-75 psig, (276-517kPa)
Minimum Flow Rate: 1½gpm (5.7lpm)
Water Requirements:
Water connection inlet: ¼ inch male flare fitting
NEW TECHNOLOGICAL FEATURES
The FETCO hot water dispenser uses new
t
∫
f
Touch Function Selector Technology to operate the hot water dispenser.
The
t
∫
f
Touch Function Selector buttons (above and below display screen) alternately dim and brighten when selection is not active.
Dispensing and Feature Selections activate when touched. The front panel is clean and uncluttered.
Programming, display and error codes are interactive and more intuitive.
Float indicator is built into drip tray to help simplify maintenance and cleaning.
NOTE:
The HWD-2105 Digital Hot Water Dispenser cannot be modified into a HWD-2105 TOD Temperature on Demand Hot Water Dispenser
Weights and Capacities
Dispenser Model
Weight
(empty)
Water tank
Capacity
Weight
(filled)
Height
Inches/cm
Wide
Inches/cm
Deep
Inches/cm
Hot Water Dispenser
HWD-2105
24 lbs/10.9kg
3.2 gallon/12
liter
49 lbs/22kg
24 1/2 in/62
cm
9 in/23 cm
18 1/2 in/47 cm
NOTE: Temperature accuracy of dispensed hot water may vary up to 3 ½ % of displayed temperature selection. Factors affecting accuracy include quantity of hot
water dispensed, ambient air temperature, distance of container from hot water faucet (pouring over longer distance causes more cooling)
Содержание HWD-2105 TOD
Страница 11: ...11...
