Fetco CBS-2041e, Руководство пользователя, Страница: 10 / 18

10
Temperature Settings
Parameter Name Range Default Setting Comment
7
Water Temp. (
°
F) 180
°
F - 208
°
F 200
°
F
Inside tank. Will be slightly lower at
spray head. To display in
° Celsius,
see # 58 in Advanced Settings.
8 Hot Water Service A (auto) / On / Off A (auto) A= Faucet will dispense only when not
brewing.
On=Faucet always enabled.
Off=Faucet always disabled.
9 Brew at Set
Temperature 0 - 1 1 0=Will brew at any temperature.
1=Will brew only at set temperature.
Note: Changes will not take effect until
the next brew cycle is completed.
Parameter Name Range Default Setting Comment
10 Enter Advanced
Settings &
Diagnostics
0 - 1 0 0 = Skip Advanced Settings &
Diagnostics. Loop back to start of
batch programming cycle.
1 = Enter Advanced Settings &
Diagnostics.
Important! To save your changes, press to exit programming mode and return to operating mode.
Advanced Settings and Diagnostics
Address Description Range Default Comment
50 Water Level
in Tank
0 - 1 Tests if water is touching probe.
0 = Tank is less than full
1 = Tank is full
51 Water Resistance Water resistance (ohms) as read by probe.
52 Brew Basket
Sensor State
(left / right)
0 - 1 To test, slide the brew basket in and out. Display
should toggle between 0 and 1.
0 = Brew basket in. 1 = Brew Basket out.
53 Power Relay State 0 - 1 Checks power relay on control board. To test,
press Control Panel Power Switch.
Display should toggle between 0 and 1.
0 = Power relay OFF, switch should blink.
1 = Power relay ON, switch should be lit..
54 N/A Not used on this model.
55 Tank Temperature
180
°
F - 208
°
F
Displays current tank temperature. If temperature
is below 175
°
F, displays “LO”.
56 Circuit Board
Configuration
Should read 000 for CBS-2041
001 for CBS-2042
57 Reload Defaults 0 - 1 0 Changes all settings to default factory settings.
0 = Do not reload defaults
1 = Reload all default settings
If 1 is selected, you must advance to the next
address for this change to take effect.
58 Temperature Scale F or C F F = Displays temp in degrees Fahrenheit
C = Displays temp in degrees Celsius
59 Water Volume
Scale
GAL or LTR GAL GAL = Displays volume in gallons
LTR = Displays volume in liters