6
Connection Option 4 – Wireless Bridge
You can use this option if you ordered the Wireless Bridge with your Fetch TV service. Install the Wireless
Bridge using the instructions included with it. Locate one device near your broadband modem, and the other
near your TV and STB.
1. Plug one end of an Internet Ethernet cable into the port on the Wireless Bridge located near your modem.
2. Plug the other end into any available port on your broadband modem.
3. Plug one end of an Internet Ethernet cable into the port on the Wireless Bridge located near your STB.
4. Plug the other end into the port labelled Internet on the back of your STB.
Connecting with
Wireless Bridge
Room 1
Outside
Room 2
Broadband
Connection
Fetch TV Signal
Fetch TV
Signal
Broadband
Modem
Normal
Broadband
Use
TV Aerial
AV
Cable
Wireless
Bridge
