manualshive.com logo in svg

fetatrack 360, Руководство пользователя

Поделиться
Скачать
fetatrack 360 Скачать руководство пользователя страница 12

f

etatrack 360is  issue 1 

11 

THE PRINTER

 

  

The FETATRACK 360 prints on thermo-sensitive z-fold paper using a high 
resolution thermal matrix printer. Heart rate, uterine activity and fetal movement are 
recorded together with event marks, date, time, recorder speed and mode. 
  
To load the paper pack in the printer, open the printer door by lifting the door 
release lever and pulling the door open. The paper tray will slide forward 
automatically, giving easy access for paper loading. Open two pages of paper from 
the beginning of the paper pack and with the print uppermost and the Company 
name and logo to the left place the pack in the bottom of the printer drawer. Make 
sure that the paper is properly positioned; pull the free end of the pack over the 
roller and close the door with the paper coming out over the top edge of the printer 
door. 
  
To operate the printer press the Printer On/Off switch on the front panel. The printer 
will start to run and the chart speed will be shown in the display. To turn the printer 
off press and hold the printer on/off switch until the printer stops. A few centimeters 
of paper will be fed out at high speed. 
  
The FETATRACK 360 printer will record at 1, 2 or 3 cm/min. To change the speed 
during recording simply press the printer on/off switch momentarily. The 
FETATRACK 360 is set to run at the speed of your choice and will always start at 
this speed every time the printer is turned on. For details of how to change the 
default speed see the section entitled "SETTING UP THE FETATRACK 360".  
  
In the event that the paper pack is exhausted during recording the printer will 
automatically turn off. The display will show "Paper Out" and the unit will emit an 
audible bleep. Load a new paper pack as described above and close the recorder 
door. 
  
To recommence recording press the printer on/off switch momentarily. The printer 
will print at high speed from its internal memory, that data gathered during the time 
taken to change the pack. In this way a complete recording may be obtained without 
any loss of information whilst the printer is reloaded. Once the memory printout is 
complete the printer will continue to record at the selected speed. 
  
The printer may be turned off while the paper pack is changed if the printer on/off 
button is pressed and held before opening the printer door. In this case there is no 
automatic printout of data at the recommencement of recording. 

Содержание 360


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды