Festool T 15+3 Li, Оригинальное руководство по эксплуатации, Страница: 102 / 211

18
PSC 420 EB
GB
4 Technical data

Further technical data on the charger and battery packs can be found on page 7.
5 Machine features
The specified illustrations appear at the beginning
of the Operating Instructions.
6 Operation
6.1 Charger cable holder [3-2]
Unwind the cable completely from the recess
before using the charger.
6.2 Changing the battery pack [2]

The cordless jigsaws can be charged using any
Festool battery pack from the
BPC series.
Risk of injury! Always remove the belt clip
from battery packs from the BPC series pri-
or to use.
6.3 Switch on/off
The electric power tool has one button [1-2] on
each side for switching on/off.
The PSBC 420 EB also has a variable speed trigger
[1-3] with switch lock [1-4] . For continuous opera-
tion, use the button [1-2] .
6.4 Charging the battery pack [3A]

The battery pack is delivered partially charged.
To guarantee the full battery power, charge it
completely before using it for the first time.
The LED [3-1] on the charger indicates the respec-
tive operating status of the charger.
Cordless jigsaws PSC 420 EB PSBC 420 EB
Motor voltage 10,8 - 18 V
Stroke speed 1500 - 3800 rpm 1000 - 3800 rpm
Stroke length 26 mm
Pendulum stroke 4 steps
max. inclination (only with accessory angle
table WT-PS 400) 45° to both sides
max. cutting depth (depending on saw blade)
Wood 120 mm
Aluminium 20 mm
Steel 10 mm
Weight without battery pack 1,8 kg
Safety class /II
[1-1] Chip guard
[1-2] On/Off switch
[1-3] Variable speed trigger (only PSBC 420 EB)
[1-4] Switch lock (only PSBC 420 EB)
[1-5] Adjusting wheel for stroke speed control
[1-6] Buttons for releasing the battery pack
[1-7] Extractor connector
[1-8] Saw table change lever
[1-9] Saw blade ejection
[1-10] Replaceable saw table
[1-11] Pendulum stroke switch
[1-12] Base runner
[3-1] LED-Display
[3-2] Cable holder
[3B] Wall mount for charger
LED yellow - lit continuously
Charger is ready to use.
LED green - flashing quickly
Battery pack is charged to maxi-
mum capacity.
LED green - flashing slowly
Battery pack is charged with
reduced current. Li-ion is
charged to 80 %.
LED green - lit continuously
Charging process has finished or
will not resume because the cur-
rent charging state is more than
80%.
LED red - flashing
General fault indicator, e.g.
incomplete contact, short circuit,
defective battery pack, etc.