Festool SYM 70 RE, Оригинальное руководство пользователя

Страница: 19 / 130

CAUTION
The noise emissions during actual use of the
power tool can differ from the declared val­
ues depending on the ways in which the tool
is used especially what kind of workpiece is
processed.
► Identify safety measures to protect the op­
erator that are based on an estimation of
exposure in the actual conditions of use
(taking account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time).
3 Intended use
The power tool is a stationary unit designed for
sawing strips of wood, plastic, aluminium pro­
files and similar materials. Do not use it to
process other materials, in particular steel,
concrete and mineral materials.
Only use Festool saw blades that are designed
for use in this power tool.
The saw blades must comply with the following
data:
– Saw blade diameter 216 mm
– Cutting width 2,3 mm (corresponds to the
tooth width)
– Locating bore30 mm
– Standard blade thickness1,8 mm
– Saw blade in accordance with EN 847-1
– Saw blade with chip angle ≤ 0°
Festool saw blades comply with EN 847-1.
Only saw materials for which the relevant saw
blade has been designed.
This power tool may only be used by experts or
instructed persons.
The user is liable for damage and acci­
dents caused by improper and non-inten­
ded use.
4 Technical data
Compound mitre saw SYM 70 RE
Power 1150 W
Speed (no-load) 2700 -
5200 rpm
Mitre angle Interior angle 0° - 68°
Exterior angle 0° - 60°
Compound mitre saw SYM 70 RE
Cutting range Max. strip
height
70 mm
Max. strip
width
80 mm
Tool spindle dia. 30 mm
Weight as per EPTA-Proce­
dure 01:2014
9.6 kg
5 Parts of the machine
[1-1] Transport safety device
[1-2] Spindle lock
[1-3] Speed adjusting wheel
[1-4] Hexagon socket wrench
[1-5] On/off switch
[1-6] Release lever for saw unit
[1-7] Handle
[1-8] Pendulum guard
[1-9] Stop rulers
[1-10] Saw table
[1-11] Bracket for bevel
[1-12] Table top insert
The specified illustrations appear at the begin­
ning of the Operating Instructions.
6 Operation
WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the machine's name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
must be used.
6.1 Initial commissioning
► Unlock the transport safety device [1-1] by
pulling at the locking pin.
English
19