
13
9
Service and maintenance
9.1 Acoustic warning signal
An acoustic warning signal sounds if the
air speed in the suction hose falls below
20 m/s.
Possible causes and remedies
- Suction power adjuster setting too low:
Set the suction power adjuster to a higher
setting.
- Hose diameter setting does not match the
diameter of the connected suction hose:
Set the correct hose diameter.
- Suction hose clogged or kinked:
Eliminate blockage or kink.
- Disposal/Filter bag full:
Change the disposal/
fi
lter bag.
- Filter element clogged:
Clean or replace the
fi
lter element.
9.2 Automatic
fi
lter cleaning
To maintain a constant suction power, the
fi
lter element is cleaned automatically every
30 seconds during operation.
We recommend cleaning the
fi
lter ele-
ment completely if severely clogged:
After extracting with a disposal bag:
• Set the suction power control to the ma-
ximum setting.
• Cover the end of the nozzle or suction hose
with your hand for 10 seconds.
9.3 Changing
fi
lters
CAUTION
Hazardous dust!
- Do not generate clouds of dust unneces-
sarily.
- Always wear a P2 dust mask when wor-
king with hazardous dust.
Changing the disposal bag
• Clean the
fi
lter element before changing
the disposal bag (Chap. 9.2).
• Remove the top section [Fig. 2].
• Pull the
fi
lter bag socket [5-2] carefully
from the intake opening [5-1].
• Close off the
fi
lter bag socket with the slide
piece [5-3].
• Close the disposal bag using the cord pro-
vided.
• Insert a new disposal bag [Fig. 3] in the
clean container.
• Dispose of the used bag in accordance with
statutory regulations.
Changing the
fi
lter bag
• Remove the top section [Fig. 2].
• Pull the
fi
lter bag socket [5-2] carefully
from the extractor opening [5-1].
• Close off the
fi
lter bag socket with the slide
piece [5-3].
• Insert a new
fi
lter bag [Fig. 4].
• Dispose of the used bag in accordance with
statutory regulations.
Changing the
fi
lter element
X
Never operate the machine without a
fi
lter
element as this may damage the motor.
• Remove the top section [Fig. 2].
• Pull the
fi
lter element upwards to remove
[Fig. 6].
• Open the stirrup handle [6-3] and remove
the stirrup section.
• Remove the
fi
lter retaining disc [6-1].
• Remove the
fi
lter element.
X
Clean the
fi
lter seal and
fi
ll level tube
[6-2].
• Insert a new
fi
lter element.
• Place the
fi
lter retaining disc in position.
• Replace the stirrup and secure the stirrup
handle.
• Dispose of the used
fi
lter element in ac-
cordance with statutory regulations.
9.4
Emptying the dust container
• Remove the top section [Fig. 2].
• Empty the extracted material.
• Clean the edge of the container and re-
place the top section of the extractor.
• Clean the intake opening and the hose
sleeve.
• Dispose of the extracted material in ac-
cordance with statutory regulations.
10 Accessories
Use only original Festool accessories and
Festool consumable material intended for
this machine because these components are
designed speci
fi
cally for the machine. Using
accessories and consumable material from
other suppliers will most likely affect the
quality of your working results and limit any
warranty claims. Machine wear or your own
personal workload may increase depending
on the application. Protect yourself and your
machine, and preserve your warranty claims
by always using original Festool accessories
and Festool consumable material!
Seen at Ideal Tools.
Содержание SRM 45 E-LHS 225 Planex
Страница 2: ...Seen at Ideal Tools ...
Страница 3: ...Seen at Ideal Tools ...
Страница 4: ...Seen at Ideal Tools ...
Страница 78: ...Seen at Ideal Tools ...