Festool RAP 80.02 E, Руководство по эксплуатации

Страница: 6 / 7

9
8 Fitting tools
Do not use tools whose maximum
permissible speed is lower than the
speed specified on the rotary polisher’s
ratings plate.
This is guaranteed with all original accessories
from Festool.
There are two types of fixtures depending on
the tools used.
The motor spindle is locked by pressing the
spindle stop (1.3). This permits a fast and easy
replacement of the tools used.
8.1 Direct fitting
The sanding pad STF D80 included with the
tool and the polishing drum available as an
accessory, together with the individual sanding
disks, all have an M14 thread.
These can be screwed directly into the working
spindle.
8.2 Fitting with locking nut
The flexible sanding pad is fastened to the drive
shaft with a locking nut and tightened with the
face spanner.
9 Additional handle
The additional handle (1.4) can be optionally
fitted on the right or left of the rotary polisher’s
transmission head.
10 PoliStick and Stickfix System
All PoliStick felts are mounted on the STF D80
polishing pad.
Stickfix sanding discs D115 are fastened on
the Stickfix sanding pad STF D115.
Only use polishing and sanding pads
with undamaged Stickfix adhesive
covering.
Check before use whether the hook-eye
fastening has been damaged by incorrect use
(e.g. melted).
11 Accessories
The accessory order number can be found in
your Festool catalogue or on the Internet under
”www.festool.com".
12 Care and maintenance
Always disconnect the machine at
its mains plug before performing
maintenance work!
Keep the ventilation slots in the motor housing
clean and free of obstructions at all times to
ensure an adequate circulation of air.
The tool is fitted with special motor brushes
with an automatic cut-out.
When the brushes become worn the power
supply is shut off automatically and the polisher
comes to a standstill.
Any maintenance and repair work
requiring an opening of the motor
housing may only be carried out by an
authorised customer service
workshop.
13 Warranty
Our equipment is under warranty for at least
12 months with regard to material or
production faults in accordance with national
legislation.
In the EU countries, the warranty period is 24
months (an invoice or delivery note is required
as proof of purchase).
Damage resulting from, in particular, normal
wear and tear, overloading, improper handling,
or caused by the user or other damage caused
by not following the operating instructions, or
any fault acknowledged at the time of
purchase, is not covered by the warranty.
Complaints will only be acknowledged if the
equipment has not been dismantled before
being sent back to the suppliers or to an
authorised Festool customer support
workshop.
Store the operating instructions, safety notes,
spare parts list and proof of purchase in a safe
place.
In addition, the manufacturer’s current
warranty conditions apply.
Note
We reserve the right to make changes to the
technical data contained in this information as
a result of ongoing research and development
work.
Seen at Ideal Tools.