Festool KS 60 E, Оригинальное руководство пользователя

Страница: 23 / 186

English
[1-1]
[1-2]
[1-3]
[1-4]
[1-5]
[1-6]
Handle
Safety button
On/Off switch
Lever for groove depth limit
Rotary knob for slide locking device
Lever for transport locking device
Spindle stop
Stop ruler (both sides)
Rotary knobs for securing the table
extension (both sides)
Angle display for mitre cuts
Lever for locking the mitre angle
Rotary base
Pendulum guard
Cable clamp
Extractor connector
On/off switch for spotlight (available
as an accessory depending on the
model)
FSZ120 fastening screw clamp
Adjusting wheel for setting the speed
Rotary knob for securing the rotary
base
Table extension (both sides)
Bevel holder for clamping the bevel
Star handle for securing the inclina-
tion angle
Key storage box for the Allen key
The power tool is a stationary unit designed for
sawing blocks of wood, plastic, aluminium pro-
files and similar materials. Do not use it to
process other materials, in particular steel,
concrete and mineral materials.
Only use Festool saw blades that are designed
for use in this power tool.
The saw blades must comply with the following
data:
[1-8]
[1-9]
–
–
Saw blade diameter 216 mm
Cutting width 2.3 mm (corresponds to the
tooth width)
Locating bore 30 mm
Standard blade thickness
1.6 mm
Saw blade in accordance with EN 847-1
Saw blade with chip angle ≤ 0°
Suitable for speeds above
5000
rpm
[1-10]
[1-11]
[1-12]
[1-13]
[2-1]
[2-2]
[2-3]
–
–
–
–
–
Festool saw blades comply with EN 847-1.
Only saw materials for which the saw blade in
question has been designed.
This power tool may only be used by experts or
instructed persons.
The user is liable for damage and acci-
dents caused by improper and non-inten-
ded use.
[2-4]
[2-5]
[2-6]
[2-7]
[2-8]
[2-9]
[2-10]
[2] Max. speed in the event of faulty electronics.
23
4 Technical data
Sliding compound mitre KS 60
saw
Power
1200 W
Power supply 220 – 240 V~ 50 – 60
Hz
Speed (no-load)
1300 – 3500 rpm
3 Intended use
5 Machine features
Sliding compound mitre KS 60
saw
Max. speed
[2]
5000 rpm
Max. mitre angle 60° left/right
Max. inclination angle 47/46° left/right
Saw blade dimensions 216 x 2.3 x 30 mm
Weight as per EPTA- 17.8 kg
Procedure 01:2014
CAUTION
Depending on how the power tool is used,
particularly which type of workpiece is being
machined, the noise emitted by the power
tool during use may deviate from the speci-
fied values.
► To protect the operator, safety measures
should be defined based on load estimates
obtained under real conditions of use. (All
parts of the operating cycle must be taken
into account here, including, for example,
times in which the power tool is switched
off or when it is switched on but idling.)