Festool ETS EC 150/3 EQ, Оригинальное руководство пользователя

Страница: 18 / 85

9 Service and maintenance
WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main­
tenance work.
► All maintenance and repair work which re­
quires the housing to be opened should al­
ways be carried out by an authorised serv­
ice workshop.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
parts. Order no. at:
www.festool.co.uk/service
EKAT
1
2
3
5
4
– To ensure constant air circulation, always
keep the cooling air openings in the motor
housing clean and free of blockages.
– In the event of a slowdown in performance
or increased vibrations, blow and clean
cooling air openings.
9.1 Cleaning the extraction channels
We recommend cleaning the extraction chan­
nels in the machine [4-1] roughly once a week
(particularly if sanding synthetic resin, in the
case of wet sanding and if sanding plaster) us­
ing a small flat brush or a cloth.
9.2
Cleaning the inside of the power tool
Regularly clean the inside of the power tool at
the bottom of the fan, [4-3] otherwise the vibra­
tion values worsen as a result of the dust accu­
mulation.
9.3
Replace the sanding pad and sanding
pad brake
The rubber sleeve [4-2] brushes off the sanding
pad and prevents uncontrolled turning of the
sanding pad. The sanding pad brake is almost
wear-free thanks to the pins used.
In the case of a decreasing braking effect, first
check the sanding pad for wear and replace it if
necessary. Replace the damaged sanding pad
brake/rubber sleeve.
10 Accessories
Always use original Festool tools and accesso­
ries. Using low-quality tools or accessories
from other manufacturers may increase the
risk of injury and seriously unbalance the ma­
chine, decreasing the quality of the working re­
sults and accelerating power tool wear.
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festool.co.uk .
11 Environment
Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with the European Di­
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
Information about collection points for correct
disposal is available at www.festool.co.uk/recy­
cling .
Information on REACH: www.festool.co.uk/
reach
12 General information
12.1 Information on data privacy
The power tool contains a chip which automati­
cally stores machine and operating data. The
data saved cannot be traced back directly to an
individual.
The data can be read in a contactless manner
using special devices and shall only be used by
Festool for fault diagnosis, repair and warranty
processing and for quality improvement or en­
hancement of the power tool. The data shall not
be used in any other way without the express
consent of the customer.
Imported into the UK by
Festool UK Ltd
1 Anglo Saxon Way
Bury St Edmunds
IP30 9XH
Great Britain
English
18