7
Dust extraction
Dust extractors prevent large accumulations of
dust in the air in the working environment and dirt
collecting in the workplace.
Turbo-fi lter (partly accessories)
The sanding dust is extracted through suction open-
ings in the sanding base
[3-4]
and trapped in the
turbo-fi lter
[3-2]
.
The turbo-fi lter has to be changed when it is so full
of dust that the extraction power diminishes:
– Push the front cardboard section of the turbo-
fi lter with the sealing lip
[3-1]
onto the extraction
nozzle
[3-8]
of the fi lter holder
– Insert rear cardboard section with slot
[3-3]
onto
the retaining strip
[3-9]
of the fi lter holder
– Push the fi lter holder with its opening
[3-6]
as
far as it will go onto the extraction nozzle
[3-5]
of the machine and clamp tight by turning rotary
knob
[3-7]
.
External extraction by an extraction unit
In order to avoid frequent changing of the turbo-fi l-
ter when carrying longer sanding jobs, it is possible
to connect a Festool extractor to the unit instead of
using inbuilt extraction.
In this case, the extraction pipe (Ø 27 mm)
[4-1]
of the extraction unit is connected to the suction
nozzle.
Attaching sanding material
The appropriate Stickfi x sanding paper and Stickfi x
sanding felt can be fastened quickly and easily onto
the Stickfi x sanding base.
The self-adhesive sanding material
[5-2]
is simply
pressed onto the sanding base
[5-1]
and held safely
in place by the Stickfi x sanding base velcro surface.
Choice and installation of
the grinding disks
The appliance can be fi tted with three grinding
disks
[5-1]
of different hardness depending on the
surface to be treated.
• Hard:
coarse grinding on surfaces, grinding at
edges.
• Soft:
universal for coarse and fi ne grinding, for
fl at and curved surfaces.
• Super-soft:
fi ne grinding on formed parts, curves,
radii. Do not use on edges!
3-3
3-2
3-1
3-4
3-5 3-6 3-7 3-8
3-9
4-1
5-1
5-2
Содержание ETS 150/3 EQ
Страница 2: ......
