Festool ECU 45, Руководство по эксплуатации

Страница: 5 / 6

7
3 Wall mounting
The charger ECU 45 has two longitudinal slots on
its rear by which it can be suspended on walls using
two screws (e.g. button-headed or flat head screw
with a shaft diameter of 5 mm).
Screw the screws into the wall so that their heads
protrude approx. 4 mm.
4 lnstructions on application -
maintenance - care
The equipment is generally maintenance-free.
To ensure trouble-free operation we recommend
that the following instructions be adhered to:
• Keep the air vents clean to guarantee the air
circulation for cooling.
• Keep the connection contacts clean.
• Festool chargers and Festool battery packs are
designed for each other. Therefore, only use
Festool chargers to charge Festool battery
packs.
• By keeping the battery pack in a ready for use
charger, the battery pack will be kept in a state of
readiness by float charging conservation.
• Do not keep discharged battery pack (maximum
one month) attached to charger whenever charger
is detached from the power supply (danger of
deep discharging).
• Whenever two battery packs are inserted into the
quick charger they will be charged in the order of
insertion.
• A new battery pack or a battery pack not used for
a longer period of time reaches it full capacity after
about 5 charging and discharging cycles.
• Battery packs should, before charging, be fully
discharged if possible. Continuous starting of the
charging process shortens the lifespan of the
batteries.
• Do not expose battery packs to direct rays of the
sun or high temperatures - Temperatures over
45°C will shorten the life of the battery.
• All maintenance and repair work, requiring
dismantling of equipment, may only be performed
by an authorised after-sales service workshop.
5 Recycling battery packs
Never throw spent battery packs into domestic
waste containers!
Return spent or defective battery packs to dealers,
the Festool after-sales service department or
approved waste disposal facilities.
This ensures that they are correctly recycled.
6 Warranty
Our equipment is under warranty for at least 12
months with regard to material or production faults
in accordance with national legislation.
In the EU countries, the warranty period is 24 months
(an invoice or delivery note is required as proof of
purchase).
Damage resulting from, in particular, normal wear
and tear, overloading, improper handling, or caused
by the user or other damage caused by not
following the operating instructions, or any fault
acknowledged at the time of purchase, is not
covered by the warranty.
Complaints will only be acknowledged if the
equipment has not been dismantled before being
sent back to the suppliers or to an authorised
Festool customer support workshop.
Store the operating instructions, safety notes, spa-
re parts list and proof of purchase in a safe place.
In addition, the manufacturer’s current warranty
conditions apply.
Note
We reserve the right to make changes to the
technical data contained in this information as a
result of ongoing research and development work.
The plastic material of this product is provided with
a material marking to secure a controlled recycling.
Seen at Ideal Tools.