Festool CLEANTEX CTL 26 E SD, Оригинальное руководство по эксплуатации

Страница: 14 / 110

14
CLEANTEX CTL/ CTL AC
GB
4 Intended use
The mobile dust extractors are designed for
extracting hazardous dusts with values up to
1 mg/m³ corresponding to dust class ’L’ in
accordance with IEC 60335-2-69.
The extractors are designed to extract water.
The extractors are designed for heavy-duty
applications and industrial use in accordance
with EN 60335-1 and EN 60335-2-69.
The user bears the responsibility for
damage and accidents caused by im-
proper use.
5 Safety instructions
Warning! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
– The machine is not intended for use by
persons (including children) with limited
physical, sensory or mental ability or with-
out sufficient experience and/or knowl-
edge, unless they are supervised by a
person responsible for their safety or have
been instructed on how to use the ma-
chine. Children should always be super-
vised to ensure that they do not play with
the machine.
– Warning: the machine may contain haz-
ardous dust. Only authorised and qualified
personnel with suitable protective equip-
ment may perform maintenance work, in-
cluding emptying the container and
changing the filter. Do not operate the ma-
chine without a fully fitted filter system.
– When handling and extracting dusts that
are hazardous to health, the safety regula-
tions applicable in your country as well as
the specifications of the material manufac-
turer must be observed without fail.
– When extracting hazardous dust or large
quantities of oak or beech dust, only use
the machine in combination with a single
electric or pneumatic tool.
– Risk of explosion and fire hazard: do
not extract sparks or hot dust, flammable
or explosive dust (e.g. magnesium, alu-
minium), flammable or explosive fluids
(e.g. petrol, thinner), aggressive fluids/
solids (e.g. acid, leach, solvent). The ex-
traction of wood dust is permitted. This
mobile dust extractor is suitable for ex-
tracting paint dust. Operate the machine in
a well-ventilated room (observe national
industrial safety regulations).
– Do not damage the mains power cable
(e.g. by driving over, dragging, etc.). Pro-
tect from heat, oil and sharp edges. Do not
pull the plug from the socket by the cable.
– Check the plug and the cable regularly and
have them replaced by an authorised ser-
vice workshop should either become dam-
aged cable with the type specified in the
spare parts list. Always replace the mains
power cable with the type specified in the
spare parts list.
– Do not expose the machine to rain.
– The machine should only be used by ap-
pointed persons instructed in correct ma-
chine handling.
– Before use, operators shall be provided
with information, instruction and training
for the use of the machine and the sub-
stances for which it is to be used, including
the safe method of removal and disposal of
the material collected.
– For reasons of safety, never operate the
machine from an unearthed socket.
– Always use the machine socket for the pur-
pose specified in the manual.
– Always use original Festool accessories.
– Pull the plug from the socket when the ma-
chine is not in use and prior to mainte-
nance and cleaning work.
– Do not lift or transport the machine by the
handle using a crane or lifting gear.
Weight CTL 26 E, CTL 26 E SD 13.9 kg
CTL 36 E, CTL 36 E LE
14.4 kg
CTL 26 E AC
14.7 kg
CTL 36 E AC, CTL 36 E LE AC
,
CTL 36 E AC-LHS
15.2 kg
Mobile dust extractors