Festool CLEANTEC CTLC MIDI I, Оригинальное руководство пользователя

Страница: 23 / 24

Bluetooth
®
connection to the Festool Work App
can be established.
► Press the connection button on the remote
control [1-19] until the LED indicator [1-20]
flashes blue.
The remote control is ready for connection for
60 seconds.
► Follow the instructions provided in the
Festool Work App to authorise the secure
connection.
13 Warning signals
Warning
signal
Description of warning signal Cause Action
Visual LED [1-15] Flashes green Battery pack empty. Charge the battery pack.
Incorrect battery
pack.
Use correct battery pack (see
section 4 ).
Battery pack too cold. See battery pack operating man­
ual for operating temperature.
Flashes red Battery pack faulty. – Change the battery pack.
– Use the charger to check that
the battery pack is fully function­
al once it has cooled down.
Lights up red Cordless mobile dust
extractor overheating
See section 10.4 .
Battery pack over­
heating.
Leave the battery pack to cool
for approx. ten minutes.
Water level limit:
Maximum fill level
reached
See section 11.2 .
Acoustic Signal Regular Volume flow below
20 m/s.
Only for dust class M (see sec­
tion 10.3 ).
Increasing, begin­
ning with two short
Battery pack charge
low.
– Charge the battery pack.
– Use a newly charged battery
pack.
14 Maintenance and care
WARNING
Risk of injury, electric shock
► Before all maintenance and care work, al­
ways remove the battery pack from the
cordless mobile dust extractor.
► All maintenance and repair work which re­
quires the motor housing to be opened
must always be carried out by an author­
ised service workshop.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.co.kr/service
Always use original Festool spare
parts. Order no. at:
www.festool.co.kr/service
EKAT
1
2
3
5
4
► Regularly clean the fill level sensors [9] and
empty the dirt trap [1-9].
Observe the following information:
–
Dust-related inspection (e.g. for filter dam­
age, tightness of the machine and function
of the control devices) by the manufacturer
or an instructed person at least once a
year.
– Dispose of components that cannot be
cleaned. Use impermeable bags to do so.
Observe the applicable disposal provisions!
– Keep the contacts on the cordless mobile
dust extractor, charger and battery pack
clean.
English
23