Festool CLEANTEC CTLC MIDI I, Оригинальное руководство пользователя

Страница: 22 / 24

► Close the suction hose manually while at
the same time briefly pressing down the
cleaning lever [1-5] three times.
11.5 Changing the filter bag with minimal
dust
► Open the locking clips and remove the top
section of the machine [2].
► Pull the tab on the filter bag until the filter
bag opening is fully closed.
The filter bag is now securely closed and can be
removed.
► Fit the top section of the machine and close
the locking clips.
11.6 Changing the main filter [6]
► Remove the used main filter [1-6].
► Dispose of the used main filter in accord­
ance with statutory regulations.
► Insert the new main filter.
PO numbers for accessories, filters and
consumables in the Festool catalogue or
online at "www.festool.com".
NOTICE
Damage to the motor
► Never extract material without a main filter
or with a damaged main filter, as this can
damage the motor.
11.7 After finishing work
► Switch off the cordless mobile dust extrac­
tor.
► Remove the battery pack.
Note: Keep the unused battery pack away
from metal objects (e.g. nails, screws, keys,
paper clips, etc.) as these may cause bridg­
ing of the contacts.
► Empty the dirt trap.
► Place the suction hose in the sealable hose
holder [7].
► Vacuum and wipe the inside and outside of
the cordless mobile dust extractor to clean
it.
► Place the cordless mobile dust extractor in
a dry room inaccessible to unauthorised
users.
The lid of the hose holder [1-3] also serves
as a storage area for tools.
12 Remote control
12.1 Intended use of remote control CT-F I
The remote control can manually start / stop a
connected cordless mobile dust extractor.
The user is liable for improper or non-in­
tended use.
CT-F I:
R-C-Fe8-CTFI
A/S: 02-6022-6740
www.festool.co.kr
12.2 Assembly
Attach the remote control [1-18] to the suction
hose using the corresponding fastening
strap [1-23].
To connect the remote control and the
cordless mobile dust extractor, see sec­
tion 9.2 .
12.3 LED indicator [1-20]
The remote control's LED indicator displays,
the charge status of the remote control in addi­
tion to the Bluetooth
® functionality:
Flashes blue once
Confirmation of the connection button
[1-19] or MAN button [1-21] having been
pressed.
Flashes purple once
The remote control has been reset.
Flashes red
The remote control's battery is nearly
empty and must be replaced.
12.4 Changing the remote control's
battery [8]
The remote control is operated using a CR
2032 battery.
If the battery compartment is opened, we
recommend that you replace the seal (20 x
1.3 mm).
► Open the battery compartment closure.
► Replace the battery.
► Close the battery compartment.
12.5 Software update
To check whether a software update that will
enhance the functions of the remote control or
improve existing functions is available, a
English
22