Festool AG 125-14 DE, Руководство пользователя

Страница: 9 / 11

16
7 Safety elements assembly
WARNING
Risk of accident, electric shock

Always pull the plug out of the socket before
performing any type of work on the machine.
CAUTION
Always use the additional handle to guarantee
a safe, non-tiring working posture.
7.1 Exhaust cover
Assembly [2]
Removal [2 a]
7.2 Brush ring
Assembly [3]
Removal [3 a]
7.3 Additional holder
Special construction “VIBRASTOP” regulates the
vibrations with additional holder [1-8] .
7.4 Dust extraction
WARNING
Dust hazard

Always work with a dust extractor.
To ensure suction, put the hose of a Festool vacuum
cleaner class M or H into the suction adapter [1-2] .
Warning: Always work with the suction connect-
ed. Use exclusively antistatic vacuum cleaners to
prevent discharges of static electricity in dusty
environments.
8 Fastening the grinding wheel
WARNING
Do not use quick-change nuts for clamping the
disc!
WARNING
Only use diamond grinding discs recommended
by the manufacturer and the prescribed fl ang-
es included with the cover and the grinder [4].
- For reasons of safety, always use original Fes-
tool sanding discs!
- If the permissible revolution speed is given on
the disc, it must not be lower than the highest
no-load speed of the grinder.
- Discs with a permissible peripheral speed of
80 m/s and higher may be used.
- Test new grinding discs by letting them run for
about one minute with no load.
- Unbalanced or vibrating discs should not be
used and should be discarded.
- Protect grinding discs from shock, impact and
lubricants.
- For diamond discs with inner diameter of
22.2 mm, insert spacer ring [4-4] .
8.1 Assembly with standard fastening nut

Clean the fl ange [4-2] and fastening fl ange [4-
3] and grinding wheel fastening areas.

Mount the fl ange [4-2] with shoulder out to
grinding wheel [4-1] .

Mount grinding wheel. Flange shoulder must
fi t the grinding wheel aperture.
9 Activation
WARNING
Risk of accident if the machine is operated us-
ing unauthorised voltages or frequencies.

The mains voltage and the frequency of the
power source must correspond with the spec-
ifi cations on the machine’s name plate.

In North America, only Festool machines with
the voltage specifi cations 120 V/60 Hz may
be used.
9.1 Switching on – off
Switching on

Slide the on/off switch [1-7] forwards.

Continuous operation: pressing the front part
of the switch at the same time locks the on/
off switch.
The electric power tool starts.
Only make contact with the material once the
machine has reached operating speed.
Switching off

Lift the electric power tool from the processed
material.

Release the on/off switch [1-7] .

During continuous operation: press on the
rear part of the on/off switch [1-7] .