Festool 576325, Инструкция по эксплуатации

Страница: 14 / 17

sanding damp surfaces, special safety instruc­
tions must be followed. The sanders are not in­
tended to be suitable for grinding bare metal.
Material containing asbestos cannot be pro­
cessed.
The user is liable for improper or non-in­
tended use.
4 Technical data
ETS EC eccentric sander 150/3 EQ 150/3 EQA 150/5 EQ 150/5 EQA
Power 400 W 400 W
No-load speed
6000–10,000 rpm 6000–10,000 rpm
Sanding stroke 3.0 mm 5.0 mm
Sanding pad D 150 mm D 150 mm
Electronic extraction detection - x - x
1.2 kg 1.2 kg Weight as per EPTA procedure 01:2014
5 Geräteelemente
[1-1] ON/OFF button
[1-2] Speed control
[1-3] Sanding pad
[1-4] Plug-it connection
[1-5] Extractor connector
[1-6] LED for extractor signal *
[1-7] Insulated gripping surfaces (grey sha­
ded area)
* Only for power tools with electronic extractor
signal (see technical data).
The specified illustrations appear at the begin­
ning of the Operating Instructions.
6 Operation
WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
CAUTION
Heating of the Plug it connection if bayonet
fitting is not completely locked
Risk of burns
► Before switching on the power tool, make
sure that the bayonet fitting at the mains
cable is closed fully and locked.
Connecting and disconnecting the mains power
cable - see fig. [2] .
6.1 Switching on/off [1-1]
ON Press the ON/OFF button [1-1]
OFF Press the ON/OFF button
[1-1]
7 Settings
WARNING
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing any work on the
machine.
7.1 Electronics
The machine features full-wave electronics
with the following properties:
Smooth start-up
The electronically controlled smooth start-up
function ensures that the power tool starts up
smoothly.
Constant speed
The preselected motor speed is kept constant
through electronic control. This ensures a uni­
form cutting speed even when under load.
English
14