Festool 204137, Оригинальное руководство пользователя

Страница: 18 / 140

backwards, cutting whatever is in its path.
Be aware of the time it takes for the blade
to stop after switch is released.
Function of the guide wedge [1-5]
a. Use the correct saw blade for the guide
wedge, where possible. The function of the
guide wedge is restricted if using saw
blades with a thicker blade core. To en­
sure that the guide wedge functions prop­
erly, make sure the blade core of the saw
blade is thinner than the guide wedge and
that the tooth width is greater than the
thickness of the guide wedge. Expect in­
creased risk of kickback when using a
thicker saw blade.
b. Do not operate the saw if the guide wedge
is bent. Even the slightest problem can
cause the guard to close more slowly.
Further safety instructions
– This electric power tool cannot be instal­
led in a work bench. The electric power
tool may become unsafe and cause serious
accidents if installed in benches from other
manufacturers or self-manufactured work
benches.
– Never place your hands into the chip ejec­
tor. You may injure yourself on rotating
parts.
– Use suitable detectors to determine if util­
ity lines are hidden in the work area or
call the local utility company for assis­
tance. Aontact with electric lines can lead
to fire and electric shock. Damaging a gas
line can lead to explosion. Penetrating a
water line causes property damage or may
cause an electric shock.
– Wait until the power tool stops completely
until placing it down. The tool can become
entangled and lead to a loss of control of
the power tool.
– Do not use the machine for overhead work.
– Harmful/toxic dust may be produced dur­
ing your work (e.g. paint containing lead,
certain types of wood and metal). Inhaling
or coming into contact with this dust may
represent a hazard for operating personnel
or persons in the vicinity. Comply with the
safety regulations that apply in your coun­
try.
Wear a P2 dust mask to protect your
health.
Ensure that enclosed spaces are adequately
ventilated and, if necessary, connect a mobile
dust extractor.
– Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg­
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
2.3 Residual risks
In spite of compliance with all relevant design
regulations, hazzards while operating the ma­
chine still occur e.g.:
– Touching the saw blade in the area of the
front opening below the saw table,
– Touching the parts of the saw blade that
protrude below the saw table while cutting,
– Touching rotating parts from left and right
sides: saw blade, clamping flange, flange
screw.,
– Kickback of machine due to jamming in the
workpiece,
– Touching live parts when the casing is
opened and the mains plug is in the socket,
– the flying off of parts,
– the flying off of machine parts from a dam­
aged machine,
– noise emission,
– dust emission.
2.4 Aluminium processing
When sawing aluminium, the following
measures must be taken for safety reasons:
– Connect the power tool to a suitable dust
extractor.
– Regularly clean dust deposits from the mo­
tor housing on the power tool.
– Use an aluminium saw blade.
Wear protective goggles.
– When sawing panels, they must be lubrica­
ted with petroleum but thin-walled profiles
(up to 3 mm) can be sawed without lubrica­
tion.
2.5 Emission levels
The levels determined in accordance with
EN 62841 are typically:
English
18