Festool 201064, Инструкция по эксплуатации

Страница: 8 / 31

8
Machine-related safety instructions
– To Reduce the Risk of Electric Shock or Injury,
Use Indoors only.
– Do not operate the machine unless the indicator
on the vacuum gauge is within the green sector.
Check the vacuum prior to each machining pro-
cess.
– The vacuum pump may not be operated when in-
stalled in the SYSTAINER or other transport con-
tainer such as a crate etc.
– Do not expose parts of the body to vacuum forces
– Observe the maximum air humidity:
Intended use
The vacuum pump VAC PMP designed to generate a
vacuum. The vacuum pump VAC PMP is designed
for industrial applications.
For indoor use only. The vacuum pump VAC SYS VP
must be operated at less than 6500 ft (2000 m)
above sea level. The vacuum pump should only be connected to a
Festool clamping unit VAC SYS SE.
The user is liable for improper or non-in-
tended use.
Technical data
Functional description
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. While reading the manual you can fold out
the page for comparison and quick reference.
Temperature Relative
air humidity
Operation 68 °F (20 °C) 95 %
104 °F (40 °C) 60 %
Storage 68 °F (20 °C) 95 %
104 °F (40 °C) 80 %
Vacuum pump VAC PMP
Volume flow (air) max. 124 cu.ft./h (3.5 m
3
/h)
Current 2.5 A
End pressure abs. 150 mbar
Motor speed 3300 rpm
Ambient temperature range 41 °F - 104 °F (5 - 40 °C)
Ambient pressure Atmospheric pressure
Weight 20.4 lb (9.25 kg)
[1-1] Cable spool and support
[1-2] Vacuum gauge
[1-3] Vacuum connection
[1-4] On/Off switch
[2-1]
Slide valve
[2-2]
Rotary knob for clamping the suction
plate
[2-3] Locking pin for suction plate
[2-4] Clamp lever for tilting fixture
[2-5] Foot valve
[2-6] Suction plate