Festo FEC-FC640, Руководство пользователя

Страница: 25 / 34

Design and function
•
Connection to a process simulation
The PLC board can communicate with a process simulation (COSIMIR
®
PLC,
EasyVeep) via the SysLink interface.
For digital signals you need:
– The Interface EasyPort, Order No. 167121,
– 2x I/O data cable (crossed), Order No. 167197.
3.3
Connection of external
equipment
Attention
The EasyPort must not be connected to a separate voltage if the I/O data cable is
used. The voltage supply to the EasyPort is effected via the cable.
•
The simulation box
It generates binary input signals and displays binary output signals of the PLC.
For digital signals you need:
– Digital simulation box, Order No. 170643.
Attention
The simulation box does not need to be connected to a separate voltage supply if
this cable is used, since the voltage supply from the PLC board is effected via that
cable.
•
The universal terminal unit (SysLink) Order No. 162231, equipped with the same
interface, can be connected via the cable Order No. 034031, and the actuators
and sensors connected via 4 mm fail-safe plug.
The voltage supply must be effected via an external 24 V DC source. The power
supply units from Festo Didactic are suitable for this and are available in the form of
a function card variant for the ER-cabinet frames or in the form of a table variant.
© Festo Didactic GmbH & Co. • 668858
25