Festo EXCM-30 -PF Series, Руководство пользователя

Страница: 20 / 84

2 Overview
20 Festo – EXCM-30/-40-...-PF-EN – 1603 – English
2.9.2 LED display components
Equipment and function statuses of the controller are displayed over the three LED display compon­
ents.
The behaviour and the colour of the LEDs differ dependent on the type of status display.
1
2 3 4
1
7-segment display
2
COM (green/yellow/red)
1)
3
Device (green/red)
1)
4
Power (green)
2)
1) Static and dynamic behaviour
2) Only static behaviour (on/off )
Fig. 2.10 Display components
Power
The LED indicator “Power” is illuminated only when the load voltage is present and simultaneously
(STO1 = 1) and (STO2 = 1).
Device
The operational readiness of the controller and existing malfunctions (errors/warnings) are signaled
through the “Device” LED display (
è
Tab. 2.2 LED indicator - device).
LED (green/red) Status Meaning
Illuminated green Ready for operation
(controlled status)
Flashes green (– – – …)
Not ready for operation
(uncontrolled status)
ON
OFF
Illuminated red Error is present
Flashes red (–– –– –– …) Warning is present or controller identi­
fication is active
(
è
4.5.4 Controller identification)
ON
OFF
Tab. 2.2 LED indicator - device