Festo EXCM-10, Инструкции по ремонту

Страница: 45 / 52

45 / 52 Festo 7EXCMc_en
12. Press the stop edge of the slide against the roller carriage.
13. Tighten the socket head screws to a torque of 1.2 Nm ±10 %.
Only with EXCM-30-…-P8
1. Place the terminal block on the Y-traverse.
2. Screw in the socket head screws and tighten to a tightening torque of
1.2 Nm ±10 %.
3. Mount the second terminal block in the same way as the first one.
Note
After inserting the slot nuts, ensure that they do not fall into the gantry and /
or become lost.
4. Insert the slot nuts into the two terminal blocks.
5. Push the cover through the side of the slide and position in the middle.
6. Screw the countersunk screws into the terminal blocks and tighten to a
tightening torque of 1 Nm ±10 %.