Size
32
45
60
Spindle pitch
[mm/re-
v]
3
8
3
10
5
12
Max. logic current consump-
tion
[mA]
300
1) Maximum value for Speed In/Speed Out at level 10
2) Maximum value for force at level 10
3) The force is controlled and evaluated by regulating the motor current. Depending on the mechanism of the
drive, a linear force can be determined from the level of current measured. The target is set as a percent-
age of the rated motor current and may differ from the actual force at the electric cylinder. In the case of
low set force levels, the influence of friction in the system on the running behaviour and the actual force on
the electric cylinder must also be taken into account.
4) Distance (MechIn –LimIn or MechOut –LimOut)
Tab. 6 Technical Data EPCS-BS