Festo ELCC-TB-KF, Инструкции и эксплуатация

Страница: 14 / 24

11 Malfunctions
11.1 Fault clearance
Fault description Cause Remedy
Coupling spacing is wrong. Observe the permissible coup-
ling spacings
è
Instruction
manual for motor mounting kit.
Tensions – Install the axis so it is free
of tension; maintain even-
ness of the bearing surface
è
7.2 Mounting.
– Change arrangement of the
tool/payload.
– Align axis so it is exactly
parallel to the second axis.
Controller is set incorrectly. Change parameters.
Insufficient lubrication at guide. Lubricating the axis
è
10 Maintenance.
Guide unit is defective. Send axis to Festo or contact
the local Festo service.
Squeaking noises, vibrations or
the axis is not running
smoothly.
Wear on toothed belt/guide or
belt reversal point Send axis to Festo or contact
the local Festo service.
Coupling spins. Check the assembly of the
motor mounting set
è
Instruc-
tion manual for motor mounting
kit.
Axis slides or does not move.
Loads too high. Reduce load mass/torques.
Axis travels over end position. Proximity sensor does not
switch. Check proximity sensor, connec-
tions and controller.
Malfunctions
14 Festo — ELCC-TB-KF — 2018-05