Festo ELCC-TB-KF, Инструкции и эксплуатация

Страница: 4 / 24

1 Further applicable documents
All available documents for the product
è
www.festo.com/pk.
2 Safety
2.1 Safety instructions
– Observe labelling on the product.
– Prior to assembly, installation and maintenance work: Switch off power supply, ensure that it is
off and secure it against being switched back on.
– Store the product in a cool, dry, UV-protected and corrosion-protected environment. Ensure that
storage times are kept to a minimum.
– Observe tightening torques. Unless otherwise specified, the tolerance is ± 20 %.
2.2 Intended use
The axis is intended to be used for positioning payloads in combination with tools or as a drive when
external guides are used. The axis is provided for cantilever and slide operation.
Cantilever mode Slide mode
Tab. 1 Operating modes
2.3 Foreseeable misuse
The axis is not approved for operating conditions in which vegetable and water-soluble greases or oils
can penetrate into the axis.
2.4 Training of specialised personnel
Installation, commissioning, maintenance and disassembly should only be conducted by qualified per-
sonnel.
The qualified personnel must be familiar with installation of electrical control systems.
3 Further information
– Accessories è www.festo.com/catalogue.
– Spare parts è www.festo.com/spareparts.
4 Service
Contact your regional Festo contact person if you have technical questions è www.festo.com.
Further applicable documents
Festo — ELCC-TB-KF — 2018-05 4