
CPX-FVDA-P...
Festo CPX-FVDA-P... 1011NH English
27
3
Connection and display components
Design of output module
Description
1
2
3
4
5
6
7
8
9
– Connection block
CPX-M-4-M12X2-5POL
1
– Electronics module
CPX-FVDA-P
2
– DIL switch for PROFIsafe address
3
–
Mechanical coding
4
– Interlinking block with contact rails
CPX-M-GE-EV-FVO
5
– Rating plate (on base)
6
– Electric plug connector
7
– Module LEDs
8
– Screws, tightening torque
0.9 ... 1.1 Nm
9
Fig. 4: Design of output module CPX-FVDA-P
The use of non-specified connection and interlinking blocks is not permissible.
4
Installation instructions
Warning
S
Use only PELV
circuits
complying with IEC/DIN EN 60204-1 for the electrical
supply (protective extra low voltage, PELV).
Also observe the general requirements for PELV circuits in accordance with
IEC/DIN EN 60204-1.
S
Use only
power sources
that guarantee safe electrical isolation of the operat-
ing voltage in compliance with IEC/DIN EN 60204-1.
Содержание CPX-FVDA-P
Страница 99: ...CPX FVDA P Festo CPX FVDA P 1011NH Svenska 99...