Festo CPX-E Series, Описание

Страница: 18 / 28

3 Parameterisation
18 Festo – CPX-E-PB-EN – 2017-07 – English
Slot 2: Channel-specific module parameters
Index
Name Length
[byte] Access
1)
Data record
number
2)
Function number
16 Fault mode 64 r 2 3888
17 Fault state 64 r 3 3952
18 Force mode Outputs 64 r 4 4016
19 Force state Outputs 64 r 5 4080
20 Force mode Inputs 64 r 6 4144
21 Force state Inputs 64 r 7 4208
22 Global operating system data 40 r 8 4792
1) r = read access; w = write access
2) Siemens S7: “S7-compatible” parameter setting
Tab. 3.2
The data records (system parameters, module data and module parameters) can be read and written indirectly at
Slot 3.
For this purpose, the command box is assigned a slot number, index number and offset (Byte 4 is reserved).
Read and write procedures can be performed using Read Box and Write Box.
Slot 3: Indexed addressing of the objects
Index
Name Length
[byte] Access
1)
Data record
number
2)
Function number
16 Command box 4 r/w 9 –
17 Read Box 64 r 10 –
18 Write Box 64 w 11 –
1) r = read access; w = write access
2) Siemens S7: “S7-compatible” parameter setting
Tab. 3.3
Slots 100 … 147: Module data and module parameters
Index
Name Length
[byte] Access
1)
Data record
number
2)
Function number
3)
16 Module configuration 16 r/w 72 16 + 16m
17 Module serial number 4 r 73 784 + 4m
18 Diagnostic data module 4 r 74 2008 + 4m
19 Reserve 4 r/w 75 3224 + 4m
20 Set module configuration 8 r/w 76 4408 + 8m
21 Module parameter 64 r/w 77 4828 + 64m
22 Module parameter sets 16 r 78 976 + 16m
23 Diagnosis of all input channels 64 r 79 –
24 Diagnosis of all output channels 64 r 80 –
25 Module Fault mode 64 r/w 81 –
26 Module Fault state 64 r/w 82 –
27 Module forcen: Outputs 64 r/w 83 –
28 Module forcen: Outputs 64 r/w 84 –
29 Module forcen: Inputs 64 r/w 85 –
30 Module forcen: Inputs 64 r/w 86 –
1) r = read access; w = write access
2) Siemens S7: “S7-compatible” parameter setting
3) m = Module number
Tab. 3.4