Festo CPX-CEC-C1, Электронное руководство

Страница: 29 / 84

1. System summary
1−13
Festo P.BE−CPX−CEC−EN en 0907NH
1.4.1 CPX−specific LEDs
The displays of the CPX−specific LEDs are described in the
following. Information on the controller LEDs can be found in
section 4.2.
PS (Power System) supply to the electronics
LED (green) Sequence Meaning Error treatment
LED lights up
ON
OFF
No error. Operating
voltage/sensor supply
applied
LED flashes
ON
OFF
Operating voltage/sensor
supply outside the
tolerance range Eliminate undervoltage
LED flashes
ON
OFF
Internal fuse for the
operating voltage/sensor
supply has responded 1. Eliminate short circuit/overload on
module side.
2. Depends on the parameterisation
of the module (module parameter):
·
The sensor supply voltage will
be switched on again
auto−
matically after the short circuit
has been eliminated (default)
·
Power off/on is necessary
LED is off
ON
OFF
The operating voltage/
sensor supply is not
applied Check the operating voltage
connection of the electronics
Tab.1/3: Displays of the LED PS