Festo CPX-AP-I-PB-M12, Инструкции и эксплуатация

Страница: 10 / 30

[BF]
Off
Tab. 11 Behaviour of the display components after error-free commissioning
Information on troubleshooting in the event of incorrect behaviour:
è
Instruction manual for automation system CPX-AP
è 10 Diagnostics and fault clearance
9 Parameterisation
Various parameters are available for reading out information about the modules in an automation sys-
tem CPX-AP and adapting the modules to the application situation.
Fieldbus startup parameters
ID Parameter Instance-
s Data
type Access
1)
Arraysize
20022 Configuration of voltage monitoring load
supply PL
–
0: load voltage monitoring inactive
– 1: load voltage monitoring active, with
suppression of diagnostics at switch-
off (factory setting)
– 2: load voltage monitoring active
1 UINT8 rw
–
1) ro = read only; rw = read write
Tab. 12 Fieldbus startup parameters
Parameterisation
10 Festo — CPX-AP-I-PB-M12 — 2020-03