Festo CP-A04-M12-CL, Руководство пользователя

Страница: 53 / 86

3. Output modules type CP−A04−M12−CL
3−7
Festo P.BE−CPEA−CL−E N en 0404NH
3.3.1 Connecting the actuators
For connecting the actuators, use plugs and cables with union
nut and M12 thread from the Festo range (see Appendix A.5).
·
Tighten the plugs with the aid of the union nut in order to
prevent unintentional loosening, e.g. due to shock.
·
Seal unused connections with the protective caps sup
plied. Only in this way can you comply with protection
class IP65/IP67.
Pin assignment
The following diagram shows as an example the pin assign
ment of the actuator connections on the CP output module.
1 2 5 3 4 5
Connection 1 Connection 2 Connection 3 Connection 4
1
Pin assignment
Connection 1
1: n.c.
2: Ox+1
3: 0V
4: Ox+0
5: FE
2
Pin assignment
Connection 2
1: n.c.
2: n.c.
3: 0V
4: Ox+1
5: FE
3
Pin assignment
Connection 3
1: n.c.
2: Ox+3
3: 0V
4: Ox+2
5: FE
4
Pin assignment
Connection 4
1: n.c.
2: n.c.
3: 0V
4: Ox+3
5: FE
5
Internal connection in the module n.c.= (not connected)
Ox = output x
Fig.3/3: Pin assignment type CP−A04−M12−CL