KSK−...
Festo KSK−... 0601a English
17
S
Remove the packaging. The packaging is intended for recycling (exception:
oiled paper = other waste).
S
Please comply with national and local safety laws and regulations.
S
Use the product in its original state. Unauthorised modification is not
permitted.
5
Installation
Please note
If the shafts are damaged, this may lead to
failure of the axis synchronization.
S
Check whether the connecting shaft
shows signs of transport or storage
damage especially flaws, dents or
bending.
A KSK−... damaged to this extent is not
suitable for further use.
S
Make sure that the maximum permitted
static
slide offset
D
w
of the DGE axes is
maintained over the complete positioning
path (see Fig.24).
The diagram is already reduced by the
dynamic share of the offset by the shaft
torsion.
The slide offset
∆
w results from the offset:
of different slide feeds
∆
k
due to fitting tolerances
∆
m.
Ascertaining the offset
∆
k:
S
Measure the positioning paths k of the
slides on both axes at the same number
of revolutions of the drive shaft (if poss
ible over the complete stroke range).
The deviation
∆
k results from the path
difference.
Fig.5
Fig.6
Fig.7
Содержание 196587
