8
Before using the cooling cabinet, clean its
interior parts, following the instructions on
p. 11.
Do not start to use the appliance imme-
diately after transportation or after it has
been kept in a cold place, but let it stand
in its final location for a few hours so
that the oil has time to flow down into
the compressor.
Push the plug on the connecting lead of
the cooling cabinet into the electric
socket.
Main switch ( I )
This switches on the voltage for the app-
liance.
Switch for interior light
Operation of switches
1
0
Switches and thermostat
Using the wine cabinet
Note!
Do not put foods into the cooling
cabinet before temperature inside the ca-
binet is in the setpoint.
At the factory, the main switch was left in the
OFF- position.
When the main switch is put to the ON
position, then - after about 10 seconds - the
temperature of the cooling cabinet appears
on the display.
The temperature set at the factory is +12°C.
The temperature for the cooling cabinet can
be chosen in the range +8...+18°C to an
accuracy of 1°C.
Normally, the display shows the interior
temperature of upper part of the cooling
cabinet.
Switching on
Switch off the wine cabinet using the main
switch, by pressing the switch to the 0
position.
If the cabinet remains unused during a long
period, then take the plug out of the electric
socket.
Clean and dry the interior parts of the
cabinet and leave the door slightly open.
Switching off
SET
PGR
Interior light switch
Upper button
Lower button
Display
Main switch
Adjusting the temperature
Actual temperature in the cooling cabinet
= display doesn't flash
Set point in the display = display flashes
Factory set point is +12°C
