5
NOTE!
Check that the end of the defrost water
pipe A is in the trough on top of the
compressor.
ELECTRIC CONNECTION
The wine cabinet is connected to an eart-
hed (grounded) electric socket (single
phase, 230V, 50 Hz) using the connecting
lead of the appliance. The fuse size for
the socket is 10 A. Any alterations to the
connection method or changing of the
connecting lead must only be done by an
electrician.
The circulation of the condensation air for
the wine cabinet must not be blocked by
any excess length of connecting lead;
instead, this should be allowed to lie on
the floor behind the cabinet, for example.
Do not use an extension cord.
A
See operational description / air circulati-
on, page 7, picture.
The floor where the cabinet is situated
must be even and horizontal, and at the
same level as the surrounding floor.
In the cooling cabinet, ice formed on the
expansion coil melts automatically and the
resulting water is conducted to the evapo-
ration trough in the compressor area,
from which it evaporates automatically.
If there will be any functional disorder it is
possible that there will be water leakage
under the appliance.
That is why we recommend to install a
protective cover to the floor where the
appliance will be situated.
The floor cover can also be ordered from
Festivo-service.
The cooling cabinet can be situated
against background surface and side sur-
faces, but if its side surface comes next to
another cold storage appliance or an out-
side wall, then a ventilation gap of at least
2 cm must be left between the surfaces
concerned.
No other appliances or furniture must be
fixed to the cabinet, because it has to be
possible to pull it out for cleaning and ser-
vicing.
If the cabinet is situated in corner it must be
noticed that the door opens 90°. So it is
possible to take shelves out of the cabinet.
Min.60mm