HARDWARE
Page 4 of 10
1 GENERAL SAFETY INSTRUCTIONS
1.1 Commissioning
Before using this spray gun, some simple assembly is required.
To properly assemble the spray gun, proceed as follows:
1. Screw on the compressed air coupling and tighten it
firmly using a hexagonal wrench.
Figure 1 - Air inlet
2. Insert the paint filter, with the filtering part facing
downwards, inside the opening where the tank will be
screwed in, positioned on top of the spray gun.
Figure 2 – Inserting the filter.
3. Screw the paint tank into the opening positioned on top
of the spray gun.
Figure 3 - Tank
fervi.com
