MACHINES AND
ACCESSORIES
Page 7 of 27
Al
lr
ig
ht
s
ar
e
re
se
rv
ed
of
re
pr
od
uc
tio
n
an
d
di
ss
em
in
at
io
n
of
th
is
Te
ch
ni
ca
lM
an
ua
la
nd
do
cu
m
en
ta
tio
n
ci
te
d
an
d/
or
at
ta
ch
ed
.I
ti
s
ex
pr
es
sl
y
fo
rb
id
de
n
to
re
pr
od
uc
e,
pu
bl
is
h
or
di
st
rib
ut
e
an
y
in
fo
rm
at
io
n
fr
om
th
is
M
an
ua
l.
Co
py
rig
ht
by
FE
RV
I
3. Do not start the machine in an enclosed or poorly ventilated area, or in the presence of
a flammable and/or explosive atmosphere. Do not use the machine in damp and/or wet
locations, or those exposed to rain or humidity.
4. Before starting the machine, get used to ensuring that no remaining adjustment or
maintenance wrenches have remained inserted.
5. Keep the workplace tidy and free from hindrances; disorder causes accidents.
6. Make sure that the work environment is forbidden to children, non-employees and
animals.
7. Do not perform tasks on the machine other than those for which it was designed. Only
use the machine in the manner in which it was intended, as described in this instruction
manual.
8. Work without disturbances.
9. Work areas must be well lit.
10.Always wear eye protection and protective gloves while working. If dust is produced,
use the appropriate masks.
11.Wear appropriate clothing. Loose clothing, dangling jewellery, long hair, etc.., can get
caught in the moving parts, causing irreparable injury.
12.Replace worn and/or damaged parts, check that the guards and protection devices work
properly before operating. If necessary, have the machine checked by the service
support personnel. Use only original spare parts.
13.
Cut the mains voltage supply to the machine when:
the machine is not being operated;
is left unattended;
you are performing maintenance or adjustment because the machine does not
work properly;
the power cable is damaged;
you are replacing its tool;
in case the machine is being moved to another location;
you are cleaning the machine.
14.Do not use the machine in areas with a risk of fire and/or explosion.
15.It is recommended that users of this publication, for maintenance and repair, have a
basic knowledge of mechanical principles and of repair technique procedures.
16.
The person responsible for company safety is to make sure that the staff
responsible for using the machine have read and understood this manual in its
entirety.
17.
The company safety manager is responsible for monitoring the company's risk
status according to Legislative Decree no. 81/08.
fervi.com
