MACCHINE E
ACCESSORI
Page 17 of 20
9.2 Replacing the rollers
To replace worn trolley rollers proceed as described:
1. Remove the snap ring of the pivot on which the
rollers are mounted (
Figure 8
)
Figure 8 - Seeger pin wheels.
2. Remove the pin (
Figure 9
) by pulling it out from the
opposite side, if the extraction is difficult, hitting the
upper part of the pin with a hard plastic tool might
help.
Figure 9 - Removing the pin.
3. Remove the worn roller and replace it with a new
one
Figure 10 - Removing the
wheel.
4. Reassemble everything
in reverse order and
remember to put the appropriate spacer between
each roll (
Figure 11
).
Figure 11 - Spacer.
fervi.com
